[image]
« Drilling Software »

Welcome Guest. Please Login or Register.
Jan 1, 2010, 1:02am

[Home] [Help] [Search] [Login] [Register]


To post or reply to a question you must first log in



For more information about the Drillers Club and how to get the most from your advertising campaign click here


:: General :: Downloads, Tools, Useful Data Sheets and Company Links :: Drilling Software
   [Search This Thread][Send Topic To Friend] [Print]
AuthorTopic: Drilling Software (Read 2,931 times)
alfi
Member
*
member is offline





Joined: May 2007
Posts: 2
Drilling Software
« Thread Started on May 15, 2007, 9:01am »
Hi!

I am new here and I already checked the software-links on RIGZONE.
I am looking for a software-solution which covers the following topics:


  • Wellbore planning
  • Wellbore surveying
  • Torque and drag
  • Hydraulics
  • Pressure loss calculation
  • BHA design
  • Reporting system


The software shouldn't be too expensive... :)

Any ideas or suggestions?

Regards,

Alfi
Link to Post - Back to Top  IP: Logged
shodji
Senior Member
***
member is offline





Joined: Mar 2006
Posts: 46
Re: Drilling Software
« Reply #1 on Jun 11, 2007, 9:04am »
Landmark Graphics EDT (Engineer's Desktop Tool) pretty much covers all of your requirements below. However, price range might be of an issue.

Shodji
Link to Post - Back to Top  IP: Logged
mezaouri
Member
*
member is offline





Joined: Jun 2007
Gender: Male
Posts: 5
Drilling Software
« Reply #2 on Jun 11, 2007, 10:36am »
Hi!
may i have more informations about drilling software (DIMS)
thanx
Link to Post - Back to Top  IP: Logged
shodji
Senior Member
***
member is offline





Joined: Mar 2006
Posts: 46
Re: Drilling Software
« Reply #3 on Jun 12, 2007, 2:16am »
Could you please provide me with your email. I may able to give you a fact sheet about DIMS as well as its advanced/improved version OpenWells.

Thanks,

Shodji
Link to Post - Back to Top  IP: Logged
mezaouri
Member
*
member is offline





Joined: Jun 2007
Gender: Male
Posts: 5
Re: Drilling Software my E-mail
« Reply #4 on Jun 20, 2007, 7:06am »
Hi!
thank you 4 u'r answer about DIMS software you can send me doc at E-mail: djeoran@hotmail.com
regards.
mezaouri
Link to Post - Back to Top  IP: Logged
loki
Senior Member
***
member is offline





Joined: Aug 2008
Posts: 43
Re: Drilling Software
« Reply #5 on Aug 4, 2008, 5:16am »

May 15, 2007, 9:01am, alfi wrote:
Hi!

I am new here and I already checked the software-links on RIGZONE.

Alfi


Alfi, for wellbore planning, wellbore surveying & torque and drag you can try this www.drill-byte.com. Do you establish an Oil compay? ;)
Link to Post - Back to Top  IP: Logged
fxltyzm
Full Member
**
member is offline





Joined: May 2006
Gender: Male
Posts: 13
Re: Drilling Software
« Reply #6 on Mar 11, 2009, 7:33am »
landmark EDM
Link to Post - Back to Top  IP: Logged
scuhaci
Member
*
member is offline





Joined: Aug 2007
Gender: Male
Posts: 1
Re: Drilling Software
« Reply #7 on May 15, 2009, 11:21pm »
All links is die.
Link to Post - Back to Top  IP: Logged
medoway111
Member
*
member is offline





Joined: May 2009
Posts: 1
Drilling Software
« Reply #8 on Jun 2, 2009, 10:00am »
Dear Sir

i have only a software may help you in this case
but i do not know how to upload it in the website.

if you can help me to upload it i will do that ASAP.


kind regards

Mahmud Meghraw

Link to Post - Back to Top  IP: Logged
mezaouri
Member
*
member is offline





Joined: Jun 2007
Gender: Male
Posts: 5
Re: Drilling Software
« Reply #9 on Jun 7, 2009, 8:27pm »
Dear gents,
I' m looking for calculation method of compression length due to tool string (3 1/2¨+5¨DP)slack off , I tried the halliburton method but ???? [(desired weight/1000) x (pker depht/1000)]x coeff.
Regards
Link to Post - Back to Top  IP: Logged
sandip0707
Member
*
member is offline





Joined: Jul 2009
Gender: Male
Posts: 7
Re: Drilling Software
« Reply #10 on Jul 25, 2009, 6:35am »
i want ton-mile calculator (if it is free)
Link to Post - Back to Top  IP: Logged
munqith
Member
*
member is offline





Joined: Aug 2009
Gender: Male
Posts: 3
Re: Drilling Software
« Reply #11 on Aug 5, 2009, 5:41am »
Please I need a DRILLING OPTIMIZATION SOFTWARE urgently for my study or any books, manuals, if you know a download link please send it to me
munqithr@yahoo.com
Link to Post - Back to Top  IP: Logged
RobinDavies
Staff
*****
member is offline

[avatar]

Around the World Around the Clock

[yim]

Joined: Mar 2003
Gender: Male
Posts: 1,420
Location: Brisbane,Queensland,Australia
Re: Drilling Software
« Reply #12 on Aug 6, 2009, 5:59am »
Dear Munqith

I have to argue that all aspects of Well Planning influence Drilling Optimisation and I therefore think your (re)quest is too general.

Optimisation is no longer about just increasing ROP and lowering $/ft

Personally I can not see a single software programme or suite of software for that matter (from the same source) covering all of the aspects as first listed by Alfie in the detail that is required for an ideal 100% drilling optimization across an entire well; especially when interfaced with geological & geomechanical parameters.

For example I would isolate bit selection (a vast subject in itsef - ask Bil Short !) from BHA design (Vertical thru horizontal / up-dip)and couple fluid hydraulics with both.
Also add new categories for
Well location, accessibility & supply logistics (bases, boats, helicopters etc),
Equipment availability, logistics and reliability.
and
Equipment & Manpower costs
Then there are various OHSSE considerations that may be mandatory for inclusion - most notably well control - and also any prevalent government petroleum regulations will dictate certain operations

Since the best way to drill a well is from the bottom up testing and/or production topics need inclusion right from the start …..

How much NPT "insurance factor" will be agreed by the CEO ?

Additionally are you looking for assistance at the planning stage, for real-time monitoring / on-line improvement or with a post well audit or at all three stages?

There is a plethora of drilling engineering texts in hard and soft copy formats today
Google returns about 84,100 references for "Drilling Engineering Text Books" in 0.56 seconds !
simply for the reason that no one text covers all that we need to know to the depth that is required…….
This is borne out by the fact that specialists are needed along with their own special software for each component of well construction....
Google returns about 305,000 references for "Drilling Optimisation" in 0.32 seconds.

Overall, in my humble opinion, nothing beats starting out with a blank sheet of paper every time (no matter whether superficially the same exercise), researching data for bench marks to aspire to, thinking out loud amongst colleagues & service providers alike and then costing the planned course of action with contingencies before culminating with a team “DWOP” meeting, etc……….
and then venturing outside the office for the fun part that sorts the men from the boys……

In your search for the magic button please learn / remember a joke about "Drilling in the Nineties" that is no doubt applicable to "Drilling to the Limit" etc :
In the advent of a blowout, press Control, Alternate, Delete !!

Good Luck
RAD

Note: I assume the inactive link in the thread reflects a currently redundant association
Link to Post - Back to Top  IP: Logged
Resume can be seen : Here
munqith
Member
*
member is offline





Joined: Aug 2009
Gender: Male
Posts: 3
Re: Drilling Software
« Reply #13 on Aug 10, 2009, 4:37am »
Dear Robin

Thank you for your interest, I looking for Drilling Optimization software that related to optimize ROP using Warren et.al. & Hareland et.al. Models which their Models mainly depended on Apparent Rock Strength (ARS). Also I have many issues about these models I need to discuss them with professional persons.
Good Luck too
Munqith
Link to Post - Back to Top  IP: Logged
RobinDavies
Staff
*****
member is offline

[avatar]

Around the World Around the Clock

[yim]

Joined: Mar 2003
Gender: Male
Posts: 1,420
Location: Brisbane,Queensland,Australia
Re: Drilling Software
« Reply #14 on Aug 10, 2009, 2:05pm »
Dear Munqith,

Ah, you have now specified which aspect of drilling optimization you are interested in……and in particular ROP / Bit software that includes ARS.....

Have you discussed your interest with any rock bit representatives from the (major) manufacturers?

For example: Smith – IDEAS (Integrated Dynamic Engineering Analysis System) , Halco’s Security-DBS - SPARTA, Varel - Geoscience, NOV Reed-Hycalog – INDEX 2007, Hughes-Christensen, etc….
http://www.compositecatalog.com/magazine....H_YEAR=Nov-2007
http://drillingcontractor.org/forums/showthread.php?t=125

For commercially available software have you spoken with Lyng Drilling AS which provides a service based on an advanced drilling application to calculate an ARSL (Apparent Rock Strength Log) from existing drilling data ?
http://www.lyngdrilling.com/LD/Engineering%20Services2.htm

As you seem to be aware there are numerous patents & papers on the topic inclusive of mathematical derviations / explanations for various parameters.
Have you approached any of the authors for direction?

If all else fails why not try to utilse the various, mathematically described parameters to write your own software ?

Best regards,
RAD
Link to Post - Back to Top  IP: Logged
Resume can be seen : Here
kingdomdriller
Leading Member
****
member is offline

[avatar]

Its Ok to fail but don't accept being second best.

[msn]

Joined: Jun 2003
Gender: Male
Posts: 197
Location: Scotland
Re: Drilling Software
« Reply #15 on Aug 16, 2009, 6:11am »
Mathcad!

Learn to hand crank the numbers yourself rapido with this product or similar is the only way to go?

Simply ask the people who build and check the drilling engineering software, what cheaper and preferred product they are using?

Thus we are being conned building tarted up products that are generall from my experience not that great or good!

Mathcad. The only way to go and the fastest engineering tool for your toolkit being sold in the oil industry today.

KD.
Link to Post - Back to Top  IP: Logged
[url=http://worldwide-drillers.com/WebSitePageEditor/default.aspx?tabName=edit#]
munqith
Member
*
member is offline





Joined: Aug 2009
Gender: Male
Posts: 3
Re: Drilling Software
« Reply #16 on Aug 18, 2009, 7:29am »
Hi every one

Please I need a DRILLING OPTIMIZATION SOFTWARE for my study or any others materials, books or manuals, if you know a download link please send it to me.

Thank you

Munqith

munqithr@yahoo.com

The following link is related a MSC Thesis in this subject (Drilling Optimization):

URI: http://handle.tamu.edu/1969.1/173

To download it click open/veiw and then save it.


Link to Post - Back to Top  IP: Logged
ajay11vwerma
Member
*
member is offline





Joined: Sept 2009
Gender: Male
Posts: 1
Re: Drilling Software
« Reply #17 on Sept 2, 2009, 5:09am »
Hello every body,

I want ton- mile software. pls if any body can help me to get the same.

Thanks

Ajay verma. my mail ID ajay.k.verma@hotmail.com
Link to Post - Back to Top  IP: Logged
blatour
Member
*
member is offline





Joined: Oct 2007
Gender: Male
Posts: 2
Re: Drilling Software
« Reply #18 on Sept 8, 2009, 8:59am »
i have a ton mile excell sheet, mail me and i will send it to you
Link to Post - Back to Top  IP: Logged
btarek
Member
*
member is offline





Joined: Jan 2009
Gender: Male
Posts: 3
Re: Drilling Software
« Reply #19 on Oct 22, 2009, 3:24pm »
Osprey report can give us the Daily geological report or no
Link to Post - Back to Top  IP: Logged
sezai
Member
*
member is offline





Joined: Jun 2008
Gender: Male
Posts: 3
Re: Drilling Software
« Reply #20 on Nov 3, 2009, 6:46pm »

Jun 7, 2009, 8:27pm, mezaouri wrote:
Dear gents,
I' m looking for calculation method of compression length due to tool string (3 1/2¨+5¨DP)slack off , I tried the halliburton method but ???? [(desired weight/1000) x (pker depht/1000)]x coeff.
Regards


check pm
Link to Post - Back to Top  IP: Logged
   [Search This Thread][Send Topic To Friend] [Print]



Advertise your company here
Your company Logo

Google
Webdrillingclub.proboards.com
Click Here To Make This Board Ad-Free